S.01
Hatch Seals
Watertight sealing for marine hatches against water ingress and dust.
Rubber extrusion manufacturer in the UAE Engineered to Seal. Built to Perform.
Precision rubber profiles, seals, gaskets and fenders for marine, automotive, architectural, HVAC and packaging applications.
- 30+Years of expertise
- 56Standard profiles
- 6Elastomer families
- 5Industries served
Industries we serve
Five industries. One extrusion partner.
Standard profiles for every sector, and custom extrusions from your drawing or sample when the application calls for it.
Marine Fender & Seals
Profiles engineered for saltwater exposure, UV radiation, constant moisture and extreme temperatures. They protect vessels, docks and equipment.
34 profiles
Automotive Rubber Solutions
Weather-tight, vibration-damping rubber components for vehicles, trailers and containers, extruded to tight, repeatable tolerances.
15 profiles
Architectural Rubber Seals
Long-life seals for façades, windows and doors that prevent water ingress, air leakage, dust penetration and noise transmission.
11 profiles
HVAC & Refrigeration Seals
Airtight and watertight sealing that minimises air leakage, improves thermal efficiency and protects units from dust and moisture.
4 profiles
Packaging Machinery Sponge Seals
Sponge profiles engineered for superior compression, cushioning and sealing on continuously running packaging lines.
3 profiles
Custom
Your application isn’t listed?
From a hand sketch, a CAD file or a physical sample, we develop custom profiles and scale them from prototype to full production.
Start a custom profile
Standard profiles
View all 56 profiles
From the 2026 catalogue
S.07
D-Seal
Absorbs impact; seals out moisture, vibration and dirt.
S.14
Windshield Seals
Protect windshields and viewing panels from water, wind and vibration.
F.08
DO Type Fender
Outstanding energy absorption for docks, vessels and ports.
C.01
D Type Container Seal
Excellent compression and weatherproof sealing for container doors and transport enclosures. Prevents water ingress, dust penetration and air leakage.
W.06
Pressure Plate
Supports and retains glazing assemblies for consistent sealing.
H.04
Edge Guards
Protective trim for metal panels, doors and equipment enclosures.
M.03
Sponge O-Ring Cord
Round sponge cord for custom gaskets and continuous seals against air, dust and moisture.
30+Years of expertise
About ELASTAK
Three decades of precision rubber extrusion.
For over three decades, our manufacturing expertise has helped customers solve complex sealing, protection and insulation challenges through precision rubber extrusion.
From a hand sketch, a CAD file or a physical sample, ELASTAK develops custom profiles and scales them from prototype to full production, with consistent dimensional accuracy in every batch.
Manufactured at our factory in Al Ghayl Industrial Area, Ras Al Khaimah, UAE, and supplied across the GCC and beyond.
About usSix reasons engineers specify us
-
01
Precision Manufacturing
Consistent dimensional accuracy across every production batch.
-
02
Custom Profile Development
New profiles from your drawing, CAD file, specification or physical sample.
-
03
Rapid Development
From concept and tooling to production with shorter lead times.
-
04
Material Expertise
EPDM, Silicone, Neoprene, Nitrile, SBR and Natural Rubber, compounded in-house.
-
05
Quality Focus
Controlled production processes and in-house profile inspection.
-
06
Global Supply
Supplying manufacturers, OEMs, contractors and distributors across regional and international markets.
Elastomer selection guide
The right compound for every environment.
EPDM is our core compound, used for around 95% of our profiles including our marine fenders. Every profile is compounded in-house, so other elastomers are available when the application calls for them.
Material
Temp. range
Key strengths
Typical applications
EPDM
Ethylene Propylene
Core compound · 95%
Temp.−40 to 120 °C
StrengthsExcellent weather, ozone, UV, saltwater and impact resistance; long outdoor life
ApplicationsMarine fenders, dock bumpers, marine seals, glazing & curtain-wall seals, HVAC gaskets
Silicone
VMQ
Temp.−60 to 200 °C
StrengthsWidest temperature range; food-grade options available
ApplicationsPackaging machinery, ovens, lighting, cleanrooms
Neoprene
CR
Temp.−30 to 100 °C
StrengthsBalanced oil & weather resistance; flame retardant
ApplicationsMarine seals, HVAC, edge guards
Nitrile
NBR
Temp.−30 to 100 °C
StrengthsSuperior resistance to oils, fuels and greases
ApplicationsUnder-hood seals, machinery, rubber packing
SBR
Styrene Butadiene
Temp.−40 to 90 °C
StrengthsGood abrasion resistance; cost-effective
ApplicationsGeneral sealing, impact & wear strips
Natural Rubber
NR
Temp.−50 to 80 °C
StrengthsHigh resilience, tear strength and rebound
ApplicationsAnti-vibration mounts, cushioning, impact pads
Typical values for standard compounds. Hardness, colour and special grades (flame-retardant, food-contact, sponge) available on request.
From sample to supply
Custom profile development
-
Step 01
Share
Send a drawing, CAD file, spec sheet or physical sample.
-
Step 02
Engineer
We select the compound and design the extrusion die.
-
Step 03
Prototype
Sample lengths are produced for fit and function approval.
-
Step 04
Produce
Batch production with profile-projector inspection.
In-house manufacturing
Compounded, extruded, cured and inspected under one roof.
- 3Extrusion lines
- 2Autoclaves up to 10 m
- 5Compounding units
- 6Elastomer families
Our production capabilities
Extrusion & Curing 5 machines
- 150 mm Hot Feed ExtruderOur 150 mm hot feed extruder enables high-volume production of large and complex rubber extrusion profiles with consistent output and dimensional accuracy.
- 90 mm Hot Feed ExtruderThe 90 mm hot feed extruder provides efficient and consistent production for a wide range of standard and custom rubber profiles.
- CV Line with 120 mm Cold Feed ExtruderOur continuous vulcanization (CV) line with a 120 mm cold feed extruder enables continuous production and controlled curing of rubber profiles, supporting consistent quality and precise dimensional performance.
- 10 m AutoclaveUsed for controlled curing of hot-feed extruded rubber products, our 10-metre autoclave supports reliable vulcanization and consistent material properties.
- 6 m AutoclaveThe 6-metre autoclave provides controlled curing for hot-feed extruded profiles, ensuring dependable product performance and quality.
Tooling & Quality Inspection 2 machines
- Wire Cut MachineOur precision wire cutting machine enables accurate die and tooling preparation, supporting the production of complex rubber extrusion profiles with precise dimensions.
- Profile ProjectorThe profile projector is used for detailed dimensional inspection of extruded rubber profiles, helping verify profile geometry and maintain production accuracy.
Rubber Compounding & Mixing 5 machines
- 110 Litre KneaderThe 110-litre kneader provides efficient mixing and compounding of rubber materials, ensuring uniform dispersion of ingredients before extrusion.
- 55 Litre KneaderOur 55-litre kneader supports controlled rubber compounding for different production requirements and batch sizes.
- 22 kW Mixing MillThe 22 kW mixing mill prepares and processes rubber compounds for hot-feed extrusion, supporting consistent material quality and processing characteristics.
- 65 kW Mixing MillThe 65 kW mixing mill provides higher-capacity rubber processing for efficient preparation of compounds used across our extrusion operations.
- 110 kW Mixing Mill with Batch-Off MachineOur high-capacity 110 kW mixing mill, integrated with a batch-off machine, enables efficient rubber compounding and controlled cooling of prepared batches, improving material consistency and production efficiency.
FAQs
Questions engineers ask us
Can’t find your answer? Call or WhatsApp our team and we’ll help you specify the right profile.
Ask a questionWhat products does ELASTAK manufacture?
ELASTAK specialises in precision-engineered rubber extrusion solutions, including rubber profiles, seals, gaskets, edge trims, glazing seals, U channels, D profiles, P profiles, marine fenders and custom extrusions for a wide range of industrial applications.
Can ELASTAK manufacture custom rubber profiles?
Yes. We develop custom rubber extrusions from your drawings, CAD files, technical specifications or physical samples, and support the whole process from design and tooling to prototype and production.
Which rubber materials are available?
EPDM (our core compound, used for around 95% of profiles), Silicone, Neoprene, Nitrile (NBR), SBR and Natural Rubber. Every profile is compounded in-house, and material selection is based on your application’s environment and performance requirements. Hardness, colour and special grades (flame-retardant, food-contact, sponge) are available on request.
What industries do you serve?
Marine, automotive and transport, architectural glazing and construction, HVAC and refrigeration, and packaging machinery, as well as infrastructure, industrial machinery and agriculture.
Do you offer prototype production?
Yes. We produce prototype sample lengths so you can approve fit, function and performance before full-scale production.
Can you manufacture from an existing sample?
Absolutely. Send us an existing rubber profile or component and we will analyse it and develop a matching replacement or an improved version for production.
Start your project
Send us a drawing, CAD file or sample. We’ll engineer the seal.
Tell us the application, operating conditions and quantities. Our team will recommend the compound and develop your profile from prototype to production.